Also read!
Home / Android / USB OTG and dual Y connector

USB OTG and dual Y connector

The idea is as follows: If you want to put a flash drive or a 3 g/4 g modem you use an adapter OTG. However, This enters the same connector adapter, in most cell phones or tablets, the source to recharge the battery. Wouldn't it be cool if there was a way to do both?

556e62dcf4205_IMG_20150531_170113

This could be resolved with the cable below, It has a USB input on the side. That's the idea, but it doesn't work! When the cell phone between in OTG it automatically halts the charge.

556e62e84b8b3_IMG_20150531_170210

The cable is cute, and lights red for charging and blue for OTG. Just not work both at the same time.

556e62e174ba0_IMG_20150531_170133

See below on my tablet a pendrive connected from the side.

556e62eca747f_IMG_20150531_170328

The tablet mounts the drive via USB perfectly, but loses the connection when you fit the other side at source to recharge the tablet.

556e62f9d5bc2_IMG_20150531_170348

Although it has not worked as I wanted to, is working. I leave the link to the DealExtreme:

http://www.dx.com/pt/p/3-in-1-multifunctional-smart-usb-2-0-charging-data-sync-y-cable-w-otg-white-black-383,765

About Adriano

Professor, Engineer and buyer of products crazy China.

2 comments

  1. Good afternoon,

    Have you tried connecting a USB HUB with external power supply directly to the OTG cable? I was thinking about this alternative

    • Should not work. I think the OTG option (indicated by a short circuit in a connector pin) modify the phone to feed an external device, and no longer receive power to recharge the battery. I don't think it will work in any case, only Tablet that have separate load DC input usb.

Leave a Reply to Adriano Moutinho Cancel reply

Your email address will not be published. Required fields are marked *

*